Now available online & in-store

afterpay logo
Ceramic Coating

Ceramic Coating After Care

Our ceramic coatings are strong enough to resist almost anything that comes their way, but here are a few tips to keep that finish looking great!

Ceramic Coating After Care and Washing Techniques

Congratulations on your brand new Prestige Ceramic Coating. On this page, we will discuss how to care for your new coating.

Curing Process

A brand new Ceramic Coating application will take about 2-3 days to cure to its full strength. During that time, some precautions should be taken.

Curing time is 2-3 days depending on environmental conditions such as humidity and temperature. Take special care during this period. The coating will help prevent your clear coat from getting water spots as it is hydrophobic, however, it can still get hard water spots. Be especially diligent during the curing process to prevent water spots, which may be costly to remove.

During the curing process avoid:

Parking under trees especially if there is shedding. You don’t want tree sap on a fresh coating.

Allowing bird droppings, sap, or pollen to sit on the car and bake in the sun.

Washing or abrading the paint.

If you notice that your car gets water spots, bird droppings, bugs, tree sap, or other contaminants during the first few days, immediately remove it following our care instructions. Keep in mind the coating is still curing. Be gentle when working on the paint.

Car Washing Techniques

Wash on a bi-weekly basis to avoid excessive contamination build-up.

Avoid washing in direct sunlight to minimize streaking and water spotting.

Wash from the top down leaving the dirtiest sections for last to avoid cross-contamination.

Use the “two buckets” method – one bucket for rinsing your sponge/mitt and one for soapy water.

Use separate soap and sponge/mitt for wheels.

Drying

Always dry completely and never leave to air-dry. Tap water contains minerals that may leave deposits creating water spots.

Use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.

ceramic coating after care
signature_car_wash_img1

Waterspot and dropping Removal

Never use aggressive products to polish the coating or remove surface contamination.

Never use excessive force to remove water spots.

Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from the bird droppings will break down over a few days without affecting the coating.

Interior Maintenance

For best results, clean all leather/vinyl surfaces bi-weekly.

Vacuum carpets regularly.

Immediately wipe off spills on leather, vinyl, or fabric.

Immediately absorb and clean stains on the carpet.

interior maintenance
What Not to Do and What to Do
Don'ts
Car washes:
Do's
Car washes:
A Few Last Care Tips
After Curing is Complete

Removing Contaminants

Our Ceramic Coating is extremely slick, this means most things will dissolve and be pulled off by the coating’s self-cleaning effect. Use water or a little vinegar to remove bird droppings, bugs, and tree sap. Followed by wiping it off with a soft edge-less microfiber towel.

Washing schedule

For best results, the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps. Avoid high volume brush style car washes, high PH detergent style cleaners, and bug/tar removers. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross-contamination. Use separate soap.

Washing methods

Standard home washing

Use a foam gun (optimal) or microfiber wash mitt to soap down the car. Rinse it off with a pressure washer (optimal) or hose. Dry with clean microfiber towels.

Spray ‘n wash self car washes

Select the high-pressure soap. Soap the car down (never use the provided brushes, especially on the paint!). Rinse the car off with the high-pressure rinse. Dry with clean microfiber towels.

Car washes

Touch-less car washes only. Never use a car wash with brushes! Never select the “spray wax” option.

Spot Removal

Never use aggressive products to polish the coating or remove surface contamination.

Never use excessive force to remove spots.

Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from bird droppings will break down over a few days without affecting the coating.

Automated Washing

Always go to a touch-free wash! Using an automated car wash with brushes will void your warranty. Our Ceramic Coating takes 2-3 days to achieve full hardness. Please handle with care and do not wash the vehicle for the first 2 weeks.

Annual Inspections